CHANNEL STRIP
Gate, a clean-up EQ, bus compression, de-essing and tape color in a classic console order; Amount compresses harder, Color adds drive.
Signal flow
As it opens in REAPER

Click a plugin in the list to see it. The pictures are the real NULL JSFX GFX interfaces, drawn with this chain's settings; the window around them is drawn by this site, so REAPER's own frame looks a little different.
The settings
What the chain changes from each plugin's defaults. Every control stays free to change after you load it.
1Gate
- Threshold−55 dB
- Attack2 ms
- Release150 ms
- Range−30 dB
2Parametric EQ
- Low Freq60 Hz
- Low TypeHigh Pass
- Low Q0.7
- Low Mid Freq400 Hz
- Low Mid Gain−1.5 dB
- Low Mid Q1
- Mid High Freq3000 Hz
- Mid High Gain1 dB
- Mid High Q1
- High Freq12000 Hz
- High Gain1.5 dB
- High TypeHigh Shelf
3Dynamics
- Threshold−18 dB
- Ratio3
- Knee6 dB
- Attack10 ms
- Release120 ms
- Makeup3 dB
- StyleBus
4DeEsser
- Target6500 Hz
- Reduction−4 dB
5Saturation
- Drive15%
- Mix40%
- ModeTape
Modulation
- Macro 1 moves Dynamics · Threshold by -15%
- Macro 1 moves Dynamics · Makeup by +15%
- Macro 2 moves Saturation · Drive by +40%
In REAPER an LFO is a parameter modulation and the envelope an audio control signal on the control it moves; a macro is the control with the largest depth, and the others follow it through parameter links. The Rack preset of the same name has them as real LFOs, envelope and macro knobs.
Load it
- Install NULL JSFX with the Hub or the JSFX download: the chains come in its
FXChainsfolder. - In REAPER, open a track's FX window and pick FX → Add FX chain, then NULL JSFX (REAPER's sliders) or NULL JSFX GFX (our interfaces), then Channel Strip.
- In any other DAW: load the NULL JSFX Rack (VST3 or CLAP) and pick its preset Channel Strip.