WALL OF SOUND
Blended fuzz, a thick chorus and a big hall with a spectral freeze ready to hold the sound; Amount adds fuzz and wash, Size grows the hall.
Signal flow
As it opens in REAPER

Click a plugin in the list to see it. The pictures are the real NULL JSFX GFX interfaces, drawn with this chain's settings; the window around them is drawn by this site, so REAPER's own frame looks a little different.
The settings
What the chain changes from each plugin's defaults. Every control stays free to change after you load it.
1Saturation
- Drive30%
- Tone−2 dB
- Mix40%
- ModeFuzz
2Chorus
- Rate0.5 Hz
- Depth5 ms
- Mix40%
- Voices3
- Stereo Spread80%
3Reverb
- Room Size85%
- Decay80%
- Damping50%
- Mix35%
- Pre-Delay30 ms
- Width150%
- Modulation30%
- CharacterHall
4Spectral Freeze
- FreezeOff
- Smear60%
- Mix100%
5Channel Utility
- Output Gain−4 dB
Modulation
- Macro 1 moves Saturation · Drive by +40%
- Macro 1 moves Reverb · Mix by +30%
- Macro 1 moves Chorus · Mix by +30%
- Macro 2 moves Reverb · Decay by +20%
- Macro 2 moves Reverb · Room Size by +10%
- Macro 2 moves Reverb · Pre-Delay by +20%
In REAPER an LFO is a parameter modulation and the envelope an audio control signal on the control it moves; a macro is the control with the largest depth, and the others follow it through parameter links. The Rack preset of the same name has them as real LFOs, envelope and macro knobs.
Load it
- Install NULL JSFX with the Hub or the JSFX download: the chains come in its
FXChainsfolder. - In REAPER, open a track's FX window and pick FX → Add FX chain, then NULL JSFX (REAPER's sliders) or NULL JSFX GFX (our interfaces), then Wall of Sound.
- In any other DAW: load the NULL JSFX Rack (VST3 or CLAP) and pick its preset Wall of Sound.