Download free Part of NULL JSFX 2.6.1: 113 plugins, free and open source (MIT). Easiest with NULL JSFX Hub.

Listen

The same music with the Rumble Cut preset and without the plugin. Switch while it plays.

Controls

  • Cutoff20 to 20000 Hz — Cutoff (or centre) frequency of the filter.
  • Resonance0.1 to 10 — Q of the filter; higher values add a resonant peak at the cutoff (narrower band in Band Pass and Notch).
  • Gain−12 to +12 dB — Output level after the filter.
  • ModeLow Pass / High Pass / Band Pass / Notch — Filter response: Low Pass, High Pass, Band Pass (unity peak) or Notch.
  • Slope12 dB / 24 dB — Filter steepness: 12 dB/oct (one state-variable stage) or 24 dB/oct (a second Butterworth stage in the same mode).
  • Drive0 to 100% — Soft saturation of the input before the filter, for a warmer, growlier sound; 0% is off.
  • LFO Rate0.05 to 20 Hz — Speed of the cutoff LFO in Hz when LFO Sync is off.
  • LFO SyncOff / 1/1 / 1/2 / 1/4 / 1/8 / 1/16 / 1/4T / 1/8T / 1/4D / 1/8D — Locks the LFO to the host tempo as a note value (1/1 to 1/16, triplet or dotted); while the transport plays, the LFO follows the beat.
  • LFO Depth0 to 4 oct — How far the LFO sweeps the cutoff up and down, in octaves; 0 turns it off.
  • Envelope Depth−4 to +4 oct — How far the cutoff follows the input level, in octaves (positive opens it, negative closes it on loud parts) for auto-wah effects; 0 turns it off.
  • Env Attack1 to 200 ms — How fast the envelope follower reacts to rising input level.
  • Env Release10 to 2000 ms — How fast the envelope follower falls back when the input gets quieter.

Best uses

  • Taking the top end off harsh sources
  • Thinning out the low end with High Pass
  • Filter sweeps via automation
  • Telephone and radio tones with Band Pass
  • Cutting a single resonance with Notch

Properties

Input → 2-pole (12 dB/oct) state-variable filter (low-pass, high-pass, band-pass and notch from the same structure) → Gain → Output. Stable under fast automation; zero latency.

Formats

  • JSFXJSFX for REAPER, with REAPER's own sliders
  • GFXJSFX GFX for REAPER, with its own interface
  • VST3VST3 for any DAW
  • CLAPCLAP for any DAW

Factory presets

Rumble Cut · Vocal Clean Up · Warm Top Roll-Off · Next Room Muffle · Telephone Voice · Resonant Sweep Start · Resonance Notch · Wobble Filter · Envelope Wah · Acid 24 dB · Slow Sweep · Quarter Note Pulse HP

In the FX chains and Rack presets

Auto Filter · Cassette · Cosmic Space · Dirty Reverb · Dub Echo Bus · Fragment Gate · Frozen Hall · Glitch Band · Hat Shine · Kick Fertilizer · Lo-Fi · Lo-Fi Fader · Mix Bus Finisher · Motion Pad · Noise Layer · Octave Bloom · Old Radio · Parallel Drum Smash · Robot Radio Voice · Shift Mod · Small Speaker Check · Stepped Autopan · Stepped Filter · Stutter Build · VHS Tape

See every FX chain

Try it

Try it on orOS StudioAdd it to a track in your browser, with its own interface. Nothing to install.